Thermoforming Machine TSF 700-500

Do you have questions about our products?

Simply contact us.

Thermoforming Machine TSF 700-500

TFS 700-500 Series Thermoforming Machines designed completely by Yenimak R&D engineers are capable of production of disposable plastic bowls, plates,
caps, self-lidded containers, viol, vegetables and fruit cups. Various plastic materials are available for selection, whether opting for traditional polymer materials or plastics, such as recyclable plastics like rPET, bio-based materials like PLA, or other common plastics (A-PET, PP, PS, PE) – we provide the suitable machine solution.

Have we convinced you?

Simply contact us.

Efficiency
Energieeffizienz Hochleistungsthermoformen Energiesparende Thermoformmaschinen
Adaptability
Kundenspezifische Thermoformlösungen Anpassbare Thermoformtechnik Flexible Kunststoffverarbeitung
Versatility
Multifunktionale Thermoformmaschinen Vielseitige Kunststoffformung All-in-One Thermoformlösungen
Sustainability
Umweltfreundliche Thermoformmaschinen Nachhaltige Kunststoffverarbeitung Öko-effiziente Technologien
Technical support
Zuverlässiger technischer Support Kundendienst Thermoformmaschinen Professionelle Wartung und Service
Quality
Qualitätsgeprüfte Thermoformmaschinen Hochwertige Kunststoffprodukte Premium Thermoformtechnologie
Innovation
Innovative Thermoformmaschinen Zukunftsweisende Kunststoffverarbeitung Neueste Technologie im Thermoformen

Dimension of the machine
Length: 13 m – 14 m
Width: 2.80 m (with electric cabin)
Height: 2.85 m
Weight: 17,500 kg (4 stations) / 15,500 kg (3 stations)

Maximum sheet width
950 mm (+50 mm stretching)

Sheet thickness
0.2 mm – 1.5 mm

Maximum product height
Positive : 140 mm
Negative : 140 mm

Maximum cycle speed
70 cycles / min .(dry-run)

Maximum mold area
900×700 mm

Total installed power
180kW (3st.) | 200kW (4st.)

Heaters power
130kW

Air requirement (7 bar pressure)
6-8 m³/min.

Cooling requirement
35,000 Kcal/h

Vacuum pump capacity
200 m³

Control unit
B&R – Beckhoff

Machine total operating power
40 – 70 kW

Clamping forces
Forming station (60,000 daN Limited)
Punching station (60,000 daN Limited)
Cutting station (80,000 daN Limited)

Have we convinced you?

Simply contact us.

Customizable expandable

Machine Components

Lorem ipsum dolor sit amet, consetetur sadipscing elitr, sed diam nonumy eirmod tempor invidunt ut labore et dolore magna aliquyam erat, sed diam voluptua. At vero eos et accusam et justo duo dolores et ea rebum. Stet clita kasd gubergren, no sea takimata sanctus e

  • All forming stations have 4 columns (provided as standard)
  • Forming with pressure air and / or vacuum using hanging flow valves
  • Fast and easy mold change with a special central locking system (optional)
  • Precision forming with plug assist system controlled from the touchscreen (optional)
  • Motorized upper and lower encoder controlled precision mold height adjustment
  • LED lights in the front and rear
  • Polycarbonate material is used in sliding doors
  • High flow special pressure air/ vacuum tanks and valves
  • Special bearings with long life needles are used in all knuckles
  • Flow control sensor and drain of cooling water
  • Air suspension system
  • Ø 100 columns shaft
  • Patented pneumatic support mold changing system
  • All forming stations have 4 columns (provided as standard)
  • Forming with pressure air and / or vacuum using hanging flow valves
  • Fast and easy mold change with a special central locking system (optional)
  • Precision forming with plug assist system controlled from the touchscreen (optional)
  • Motorized upper and lower encoder controlled precision mold height adjustment
  • LED lights in the front and rear
  • Polycarbonate material is used in sliding doors
  • High flow special pressure air/ vacuum tanks and valves
  • Special bearings with long life needles are used in all knuckles
  • Flow control sensor and drain of cooling water
  • Air suspension system
  • Ø 100 columns shaft
  • Patented pneumatic support mold changing system
  • All forming stations have 4 columns (provided as standard)
  • Forming with pressure air and / or vacuum using hanging flow valves
  • Fast and easy mold change with a special central locking system (optional)
  • Precision forming with plug assist system controlled from the touchscreen (optional)
  • Motorized upper and lower encoder controlled precision mold height adjustment
  • LED lights in the front and rear
  • Polycarbonate material is used in sliding doors
  • High flow special pressure air/ vacuum tanks and valves
  • Special bearings with long life needles are used in all knuckles
  • Flow control sensor and drain of cooling water
  • Air suspension system
  • Ø 100 columns shaft
  • Patented pneumatic support mold changing system
  • All forming stations have 4 columns (provided as standard)
  • Forming with pressure air and / or vacuum using hanging flow valves
  • Fast and easy mold change with a special central locking system (optional)
  • Precision forming with plug assist system controlled from the touchscreen (optional)
  • Motorized upper and lower encoder controlled precision mold height adjustment
  • LED lights in the front and rear
  • Polycarbonate material is used in sliding doors
  • High flow special pressure air/ vacuum tanks and valves
  • Special bearings with long life needles are used in all knuckles
  • Flow control sensor and drain of cooling water
  • Air suspension system
  • Ø 100 columns shaft
  • Patented pneumatic support mold changing system
  • All forming stations have 4 columns (provided as standard)
  • Forming with pressure air and / or vacuum using hanging flow valves
  • Fast and easy mold change with a special central locking system (optional)
  • Precision forming with plug assist system controlled from the touchscreen (optional)
  • Motorized upper and lower encoder controlled precision mold height adjustment
  • LED lights in the front and rear
  • Polycarbonate material is used in sliding doors
  • High flow special pressure air/ vacuum tanks and valves
  • Special bearings with long life needles are used in all knuckles
  • Flow control sensor and drain of cooling water
  • Air suspension system
  • Ø 100 columns shaft
  • Patented pneumatic support mold changing system
  • All forming stations have 4 columns (provided as standard)
  • Forming with pressure air and / or vacuum using hanging flow valves
  • Fast and easy mold change with a special central locking system (optional)
  • Precision forming with plug assist system controlled from the touchscreen (optional)
  • Motorized upper and lower encoder controlled precision mold height adjustment
  • LED lights in the front and rear
  • Polycarbonate material is used in sliding doors
  • High flow special pressure air/ vacuum tanks and valves
  • Special bearings with long life needles are used in all knuckles
  • Flow control sensor and drain of cooling water
  • Air suspension system
  • Ø 100 columns shaft
  • Patented pneumatic support mold changing system

Solution-oriented for your needs

Further products

Lorem ipsum dolor sit amet, consetetur sadipscing elitr, sed diam nonumy eirmod tempor invidunt ut labore et dolore magna aliquyam erat, sed diam voluptua. At vero eos et accusam et justo duo dolores et ea rebum. Stet clita kasd gubergren, no sea takimata sanctus e